Reference equipment information. Compatibility and availability require confirmation. These are reference descriptions, not a configurator; some original technical descriptions are in German.
Working width and conditioner combinations 17 choices
EasyCut B 1000 CV - Mower combination with CV high-performance steel-tine conditioner, Working width: 9,3-10,1 m, Power requirement: 180 PSPart / order number: 200325830-DE-2324Cannot be combined with: Outer support; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; PreSelect Digital; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Polyurethane roller conditioner without upper roller drive; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Hydraulic support leg; Additional expansion camera; SectionControl machine activation; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; Spur gearbox for the upper roller drive.; Camera for connection to CCI 800 or 1200.; Two additional standard-height mowing drums with widened crop-conveying bars.; High-cut skids for cutting heights above 90 mm — 4x.; CCI 1200 In-cab; PreSelect DS 50 mower control; Swath accelerator rollers for particularly narrow swaths, electrically operated; M-Roll steel roller conditioner with upper roller drive; ISOBUS cable; LED work lights; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; Swath accelerator rollers for particularly narrow swaths, manually operated; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; iPad holder and connection.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; KRONE SmartConnect 500 hardware and activation; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.
Price on requestMaximum quantity: 1
EasyCut B 870 CV - Mower combination with CV high-performance steel-tine conditioners, Working width: 8,7 m, Power requirement: 150 PSPart / order number: 200368700-DE-2324Cannot be combined with: Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; PreSelect DS 50 mower control; iPad holder and connection.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Polyurethane roller conditioner without upper roller drive; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; SectionControl machine activation; KRONE SmartConnect 500 hardware and activation; CCI 800 In-cab; DS 500 in-cab terminal; High-cut skids for cutting heights above 90 mm.; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; Spur gearbox for the upper roller drive.; SectionControl machine activation; Additional expansion camera; Swath accelerator rollers for particularly narrow swaths, manually operated; Camera for connection to CCI 800 or 1200.; CCI 800 In-cab + CCI 1200 In-cab; GNSS receiver antenna for position data based on GPS, Galileo and other systems; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; PreSelect Digital; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; CCI 1200 In-cab; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; LED work lights; KRONE SmartControl data-management activation on KRONE SmartConnect 500; CCI.Control data management and job processing on a CCI terminal, including RateControl.; Swath accelerator rollers for particularly narrow swaths, electrically operated; Parts kit for controlling the front mower; M-Roll steel roller conditioner with upper roller drive; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; App activation for parallel guidance and track management.; ISOBUS cable; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; ISOBUS AUX joystick; Two additional standard-height mowing drums with widened crop-conveying bars.; SectionControl terminal activation; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Outer support; Hydraulic support leg; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.
Price on requestMaximum quantity: 1
EasyCut B 880 CR - Mower combination with CR roller conditioner, Working width: 8,6/8,8 m, Power requirement: 150 PSPart / order number: 204363600-DE-2324Cannot be combined with: Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; App activation for parallel guidance and track management.; Outer support; SectionControl machine activation; CCI.Control data management and job processing on a CCI terminal, including RateControl.; Swath accelerator rollers for particularly narrow swaths, electrically operated; ISOBUS cable; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; CCI 800 In-cab; SectionControl terminal activation; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; GNSS receiver antenna for position data based on GPS, Galileo and other systems; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Additional expansion camera; Wide-spreading deflector plates for faster forage drying.; KRONE SmartConnect 500 hardware and activation; ISOBUS AUX joystick; Closed conditioner tines for increased throwing performance — 8x; Parts kit for controlling the front mower; Two additional standard-height mowing drums with widened crop-conveying bars.; CCI 800 In-cab; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; DS 500 in-cab terminal; Camera for connection to CCI 800 or 1200.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; CCI 800 In-cab + CCI 1200 In-cab; SectionControl machine activation; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; CCI 1200 In-cab; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; High-cut skids for cutting heights above 90 mm.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; iPad holder and connection.; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.
Price on requestMaximum quantity: 1
EasyCut B 1050 CV Collect - Mower combination with CV high-performance steel-tine conditioner and cross conveyor belts, Working width: 9,3-10,5 m, Power requirement: 200 PSPart / order number: 204364400-DE-2324Cannot be combined with: Additional expansion camera; ISOBUS cable; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; PreSelect DS 50 mower control; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Parts kit for controlling the front mower; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; PreSelect Digital; iPad holder and connection.; Two additional standard-height mowing drums with widened crop-conveying bars.; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Outer support; High-cut skids for cutting heights above 90 mm — 4x.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Wide-spreading deflector plates for faster forage drying.; Spur gearbox for the upper roller drive.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Closed conditioner tines for increased throwing performance — 8x; Camera for connection to CCI 800 or 1200.; Polyurethane roller conditioner without upper roller drive; M-Roll steel roller conditioner with upper roller drive; SectionControl machine activation
Price on requestMaximum quantity: 1
EasyCut B 950 Collect - Mower combination with cross conveyor augers, Working width: 9,5 m, Power requirement: 160 PSPart / order number: 202397000-DE-2324Cannot be combined with: GNSS receiver antenna for position data based on GPS, Galileo and other systems; KRONE SmartControl data-management activation on KRONE SmartConnect 500; SectionControl machine activation; ISOBUS cable; KRONE SmartConnect 500 hardware and activation; Spur gearbox for the upper roller drive.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Hydraulic support leg; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Swath accelerator rollers for particularly narrow swaths, manually operated; Polyurethane roller conditioner without upper roller drive; Parts kit for controlling the front mower; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; LED work lights; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Wide-spreading deflector plates for faster forage drying.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; M-Roll steel roller conditioner with upper roller drive; SectionControl machine activation; High-cut skids for cutting heights above 90 mm — 4x.; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; Swath accelerator rollers for particularly narrow swaths, electrically operated; iPad holder and connection.; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Outer support; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.
Price on requestMaximum quantity: 1
EasyCut B 870 CR Collect - Mower combination with CR roller conditioner and cross conveyor belts, Working width: 8,7 m, Power requirement: 170 PSPart / order number: 200371000-DE-2324Cannot be combined with: SectionControl terminal activation; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; High-cut skids for cutting heights above 90 mm — 4x.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Two additional standard-height mowing drums with widened crop-conveying bars.; ISOBUS cable; Hydraulic support leg; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; KRONE SmartConnect 500 hardware and activation; CCI 800 In-cab + CCI 1200 In-cab; CCI 800 In-cab; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; iPad holder and connection.; Outer support; SectionControl machine activation; PreSelect DS 50 mower control; App activation for parallel guidance and track management.; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; Closed conditioner tines for increased throwing performance — 8x; ISOBUS AUX joystick; PreSelect Digital; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; CCI 1200 In-cab; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; Additional expansion camera; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; Swath accelerator rollers for particularly narrow swaths, electrically operated; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; CCI.Control data management and job processing on a CCI terminal, including RateControl.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Camera for connection to CCI 800 or 1200.; CCI 1200 In-cab; GNSS receiver antenna for position data based on GPS, Galileo and other systems; Parts kit for controlling the front mower; DS 500 in-cab terminal
Price on requestMaximum quantity: 1
EasyCut B 1000 CR Collect - Mower combination with CR roller conditioner, Working width 9,3-10,1 m, Power requirement: 200 PSPart / order number: 200348300-DE-2324Cannot be combined with: PreSelect DS 50 mower control; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; PreSelect Digital; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; High-cut skids for cutting heights above 90 mm — 4x.; Closed conditioner tines for increased throwing performance — 8x; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; iPad holder and connection.; Spur gearbox for the upper roller drive.; SectionControl machine activation; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; KRONE SmartControl data-management activation on KRONE SmartConnect 500; KRONE SmartConnect 500 hardware and activation; Hydraulic support leg; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Wide-spreading deflector plates for faster forage drying.; LED work lights; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; Two additional standard-height mowing drums with widened crop-conveying bars.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Outer support
Price on requestMaximum quantity: 1
EasyCut B 1000 CV Collect - Mower combination with CV high-performance steel-tine conditioner and cross conveyor belts, Working width: 9,3-10,1 m, Power requirement: 200 PSPart / order number: 200325850-DE-2324Cannot be combined with: Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Polyurethane roller conditioner without upper roller drive; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; PreSelect DS 50 mower control; CCI 1200 In-cab; iPad holder and connection.; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; Two additional standard-height mowing drums with widened crop-conveying bars.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; High-cut skids for cutting heights above 90 mm — 4x.; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; M-Roll steel roller conditioner with upper roller drive; Camera for connection to CCI 800 or 1200.; Wide-spreading deflector plates for faster forage drying.; SectionControl machine activation; PreSelect Digital; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; KRONE SmartConnect 500 hardware and activation; KRONE SmartControl data-management activation on KRONE SmartConnect 500; Additional expansion camera; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Spur gearbox for the upper roller drive.; Hydraulic support leg; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; LED work lights; Outer support; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.
Price on requestMaximum quantity: 1
EasyCut B 870 - without conditioner, Working width: 8,7 m, Power requirement: 150 PSPart / order number: 202350830-DE-2324Cannot be combined with: DS 500 in-cab terminal; KRONE SmartConnect 500 hardware and activation; CCI.Control data management and job processing on a CCI terminal, including RateControl.; CCI 800 In-cab + CCI 1200 In-cab; Wide-spreading deflector plates for faster forage drying.; Combination skids with cutting height adjustable from approximately 50–120 mm; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; CCI 1200 In-cab; SectionControl machine activation; Spur gearbox for the upper roller drive.; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; Parts kit for controlling the front mower; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; High-cut skids for cutting heights above 90 mm.; Swath accelerator rollers for particularly narrow swaths, manually operated; GNSS receiver antenna for position data based on GPS, Galileo and other systems; ISOBUS AUX joystick; Additional expansion camera; CCI 800 In-cab; SectionControl machine activation; Hydraulic support leg; M-Roll steel roller conditioner with upper roller drive; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; LED work lights; Swath accelerator rollers for particularly narrow swaths, electrically operated; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; iPad holder and connection.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Camera for connection to CCI 800 or 1200.; App activation for parallel guidance and track management.; Closed conditioner tines for increased throwing performance — 8x; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; SectionControl terminal activation; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Polyurethane roller conditioner without upper roller drive; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Two additional standard-height mowing drums with widened crop-conveying bars.
Price on requestMaximum quantity: 1
EasyCut B 880 CR Collect - Mower combination with CR roller conditioner and cross conveyor belts, Working width: 8,6/8,8 m, Power requirement: 170 PSPart / order number: 204363700-DE-2324Cannot be combined with: SectionControl machine activation; ISOBUS AUX joystick; KRONE SmartConnect 500 hardware and activation; CCI 800 In-cab; iPad holder and connection.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Closed conditioner tines for increased throwing performance — 8x; GNSS receiver antenna for position data based on GPS, Galileo and other systems; Swath accelerator rollers for particularly narrow swaths, manually operated; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Wide-spreading deflector plates for faster forage drying.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; App activation for parallel guidance and track management.; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; Swath accelerator rollers for particularly narrow swaths, electrically operated; High-cut skids for cutting heights above 90 mm.; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; CCI 800 In-cab + CCI 1200 In-cab; Camera for connection to CCI 800 or 1200.; DS 500 in-cab terminal; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; SectionControl terminal activation; ISOBUS cable; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; CCI.Control data management and job processing on a CCI terminal, including RateControl.; Outer support; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; Additional expansion camera; CCI 1200 In-cab; Parts kit for controlling the front mower; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Two additional standard-height mowing drums with widened crop-conveying bars.; KRONE SmartControl data-management activation on KRONE SmartConnect 500
Price on requestMaximum quantity: 1
EasyCut B 870 CV Collect - Mower combination with CV high-performance steel-tine conditioners and cross conveyor belts, Working width: 8,7, Power requirement: 170 PSPart / order number: 200368720-DE-2324Cannot be combined with: Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; ISOBUS cable; Outer support; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; LED work lights; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; CCI 800 In-cab; KRONE SmartConnect 500 hardware and activation; Additional expansion camera; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; ISOBUS AUX joystick; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; Hydraulic support leg; Two additional standard-height mowing drums with widened crop-conveying bars.; Swath accelerator rollers for particularly narrow swaths, electrically operated; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Spur gearbox for the upper roller drive.; GNSS receiver antenna for position data based on GPS, Galileo and other systems; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; iPad holder and connection.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; Wide-spreading deflector plates for faster forage drying.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; PreSelect DS 50 mower control; App activation for parallel guidance and track management.; DS 500 in-cab terminal; SectionControl machine activation; SectionControl terminal activation; CCI 800 In-cab + CCI 1200 In-cab; Polyurethane roller conditioner without upper roller drive; SectionControl machine activation; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; CCI.Control data management and job processing on a CCI terminal, including RateControl.; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; High-cut skids for cutting heights above 90 mm — 4x.; PreSelect Digital; CCI 1200 In-cab; Parts kit for controlling the front mower; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers
Price on requestMaximum quantity: 1
EasyCut B 870 CR - Mower combination with CR roller conditioner, Working width: 8,7 m, Power requirement: 150 PSPart / order number: 200370000-DE-2324Cannot be combined with: High-cut skids for cutting heights above 90 mm.; SectionControl machine activation; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; SectionControl terminal activation; ISOBUS cable; CCI 800 In-cab + CCI 1200 In-cab; Swath accelerator rollers for particularly narrow swaths, manually operated; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; SectionControl machine activation; DS 500 in-cab terminal; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Two additional standard-height mowing drums with widened crop-conveying bars.; Additional expansion camera; LED work lights; Eight mowing-disc covers with scrapers — 2 x.; KRONE SmartConnect 500 hardware and activation; Camera for connection to CCI 800 or 1200.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; PreSelect Digital; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; Swath accelerator rollers for particularly narrow swaths, electrically operated; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; CCI 1200 In-cab; CCI.Control data management and job processing on a CCI terminal, including RateControl.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; GNSS receiver antenna for position data based on GPS, Galileo and other systems; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; Hydraulic support leg; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; ISOBUS AUX joystick; Outer support; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; CCI 800 In-cab; App activation for parallel guidance and track management.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Parts kit for controlling the front mower
Price on requestMaximum quantity: 1
EasyCut B 880 CV - Mower combination with CV high-performance steel-tine conditioners, Working width: 8,6/8,8 m, Power requirement: 150 PSPart / order number: 204363300-DE-2324Cannot be combined with: CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; GNSS receiver antenna for position data based on GPS, Galileo and other systems; CCI 800 In-cab + CCI 1200 In-cab; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; Outer support; DS 500 in-cab terminal; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; iPad holder and connection.; SectionControl machine activation; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; CCI 1200 In-cab; Additional expansion camera; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; SectionControl terminal activation; ISOBUS cable; M-Roll steel roller conditioner with upper roller drive; Camera for connection to CCI 800 or 1200.; Swath accelerator rollers for particularly narrow swaths, electrically operated; Parts kit for controlling the front mower; CCI.Control data management and job processing on a CCI terminal, including RateControl.; Swath accelerator rollers for particularly narrow swaths, manually operated; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; SectionControl machine activation; App activation for parallel guidance and track management.; CCI 800 In-cab; Two additional standard-height mowing drums with widened crop-conveying bars.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Spur gearbox for the upper roller drive.; High-cut skids for cutting heights above 90 mm — 4x.; Wide-spreading deflector plates for faster forage drying.; Polyurethane roller conditioner without upper roller drive; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; KRONE SmartConnect 500 hardware and activation
Price on requestMaximum quantity: 1
EasyCut B 1050 CV - Mower combination with CV high-performance steel-tine conditioner, Working width: 9,3-10,5 m, Power requirement: 200 PSPart / order number: 204364300-DE-2324Cannot be combined with: Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Swath accelerator rollers for particularly narrow swaths, manually operated; Outer support; PreSelect Digital; M-Roll steel roller conditioner with upper roller drive; High-cut skids for cutting heights above 90 mm — 4x.; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; SectionControl machine activation; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Wide-spreading deflector plates for faster forage drying.; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; Two additional standard-height mowing drums with widened crop-conveying bars.; Parts kit for controlling the front mower; Polyurethane roller conditioner without upper roller drive; Spur gearbox for the upper roller drive.; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; PreSelect DS 50 mower control; ISOBUS cable; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; Swath accelerator rollers for particularly narrow swaths, electrically operated; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.
Price on requestMaximum quantity: 1
EasyCut B 1000 - Disc mower combination for three-point mounting, without conditioner, Working width: 9,3-10 m, Power requirement: 140 PSPart / order number: 202381000-DE-2324Cannot be combined with: Swath accelerator rollers for particularly narrow swaths, manually operated; SectionControl machine activation; ISOBUS AUX joystick; Additional expansion camera; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; DS 500 in-cab terminal; Smart Farming package comprising SectionControl, CCI.Control and CCI.Assist.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; High-cut skids for cutting heights above 90 mm — 4x.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; CCI 800 In-cab + CCI 1200 In-cab; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; SectionControl machine activation; Two additional standard-height mowing drums with widened crop-conveying bars.; Camera for connection to CCI 800 or 1200.; M-Roll steel roller conditioner with upper roller drive; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Parts kit for controlling the front mower; Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Spur gearbox for the upper roller drive.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; App activation for parallel guidance and track management.; CCI.Assist activation: fill-level calculation for crop sprayers and fertiliser spreaders, plus simplified and optimised field-boundary creation.; iPad holder and connection.; CCI 1200 In-cab; CCI 800 In-cab; Swath accelerator rollers for particularly narrow swaths, electrically operated; KRONE SmartConnect 500 hardware and activation; Hydraulic support leg; SectionControl terminal activation; ISOBUS cable; CCI.Control data management and job processing on a CCI terminal, including RateControl.; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.; Polyurethane roller conditioner without upper roller drive; Outer support; Closed conditioner tines for increased throwing performance — 8x; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.
Price on requestMaximum quantity: 1
EasyCut B 880 CV Collect - Mower combination with CV high-performance steel-tine conditioners and cross conveyor belts, Working width: 8,6/8,8 m, Power requirement: 170 PSPart / order number: 204363400-DE-2324Cannot be combined with: KRONE SmartConnect 500 hardware and activation; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; SectionControl machine activation; Polyurethane roller conditioner without upper roller drive; Standard operation: electric pre-selection operation. Required hydraulic connections: 2 x double-acting + load-sensing system (P-T-LS) - side-independent folding of the transverse conveyor belts.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; ISOBUS cable; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; GNSS receiver antenna for position data based on GPS, Galileo and other systems; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; User-friendly operation, ISOBUS compatible, without operating terminal. Required hydraulic connections: Load-sensing system (P-T-LS) or 1x single-acting hydraulic valve with free return.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; High-cut skids for cutting heights above 90 mm.; Closed conditioner tines for increased throwing performance — 8x; M-Roll steel roller conditioner with upper roller drive; Parts kit for controlling the front mower; Two additional standard-height mowing drums with widened crop-conveying bars.; Spur gearbox for the upper roller drive.; Wide-spreading deflector plates for faster forage drying.; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; Outer support; iPad holder and connection.; Operator training for 2 participants; registration and available dates through your KRONE service and sales partner.; DS 500 in-cab terminal; Serial cable for connecting the GNSS receiver to trailed or mounted machines, or for installation on a tractor.
Price on requestMaximum quantity: 1
EasyCut B 1000 CR - Mower combination with CR roller conditioner, Working width: 9,3-10,1 m, Power requirement: 180 PSPart / order number: 200348200-DE-2324Cannot be combined with: Standard cross conveyor belt for generating swaths for 3m forage harvester pickups / loader wagons / round balers / large square balers; Additional hydraulic rear-frame lift for greater clearance in heavy forage crops.; Hydraulic swath curtain for evenly shaped swaths, including on wedge-shaped areas and slopes.; Swath accelerator rollers for particularly narrow swaths, manually operated; Licence for NEXT Machine Management software for using and processing machine data across manufacturers. Data exchange takes place through agrirouter.; Spur gearbox for the upper roller drive.; NTRIP service activation for transmitting an RTK correction signal for more accurate positioning; term: 12 months.; User-friendly operation, ISOBUS compatible, without control terminal, including hydraulic connection and hose for controlling the front mower.; Activation for data transfer to agrirouter (cross-manufacturer data exchange) and KRONE SmartTelematics (viewing and analysing live KRONE machine data); term: 24 months.; Two additional standard-height mowing drums with widened crop-conveying bars.; Swathing augers including rear-frame lift and hydraulic swath curtain for forming forage-harvester swaths. The source mentions a minimum swath width but gives no value; confirm it for the selected configuration.; Camera for connection to CCI 800 or 1200.; SectionControl machine activation; Closed conditioner tines for increased throwing performance — 8x; Pre-select operation via tractor-side control valves. Please select between B530 (PreSelect Digital Cable) and B531 (PreSelect DS 50).; iPad holder and connection.; Hydraulic support leg; Outer support; Basic operation via electric pre-selection control box and tractor-side control units; required hydraulic connections: 1x double-acting + 1x single-acting.; KRONE SmartControl data-management activation on KRONE SmartConnect 500; LED work lights; Additional expansion camera; Swath accelerator rollers for particularly narrow swaths, electrically operated; Wide-spreading deflector plates for faster forage drying.; KRONE SmartConnect 500 hardware and activation
Price on requestMaximum quantity: 1
Krone NEW