Reference equipment information. Compatibility and availability require confirmation. These are reference descriptions, not a configurator; some original technical descriptions are in German.
Working widths without conditioner 9 choices
Selection for version with conditionerPart / order number: VariantemitAufbereiter
Price on requestMaximum quantity: 1
EasyCut F 320 M (Generation 2) - Front disc mower, without conditioner, Working width: 3,16 m, Power requirement: 65 PSPart / order number: 200325340-DE-2324Cannot be combined with: Pull-type mounting frame for Category II three-point front linkage; Combination skids with cutting height adjustable from approximately 50–120 mm; Two small conveying drums for a narrower swath; Closed conditioner tines for increased throwing performance — 8 x; Spur gearbox for the upper roller drive.; Polyurethane roller conditioner without upper roller drive; M-Rolls steel roller conditioner with upper roller drive; Top-link forks for relief springs.; Two additional half-height mowing drums with crop-conveying bars.; Wide-spreading deflector plates for faster forage drying.; Relief springs with integrated overload protection.; Additional hydraulic lift for increased headland clearance.; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; "PUSH" attachment (pivoting); Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; PTO speed 1.000 rpm, clockwise rotation; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; PTO speed 1.000 rpm, counterclockwise rotation
Price on requestMaximum quantity: 1
EasyCut F 280 M - Front disc mower, without conditioner, Working width: 2,73 m, Power requirement: 55 PSPart / order number: 200340000-DE-2324Cannot be combined with: Closed conditioner tines for increased throwing performance — 8 x; Combination skids with cutting height adjustable from approximately 50–120 mm; PTO speed 1.000 rpm, clockwise rotation; Wide-spreading deflector plates for faster forage drying.; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Relief springs with integrated overload protection.; Spur gearbox for the upper roller drive.; Pull-type mounting frame for Category II three-point front linkage; "PUSH" attachment (pivoting); Hydraulically folding outer guards; 1 double-acting hydraulic connection required.; M-Rolls steel roller conditioner with upper roller drive; High-cut skids for cutting heights above 90 mm — 2x.; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Pull-type mounting frame for Category II front three-point linkage, with hydropneumatic suspension.; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required); Two small conveying drums for a narrower swath; Two additional half-height mowing drums with crop-conveying bars.; PTO speed 1.000 rpm, counterclockwise rotation; Polyurethane roller conditioner without upper roller drive; Additional hydraulic lift for increased headland clearance.; Push-type mounting bracket for three-point front linkage Cat II, - adjustable coil spring relief; Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; Top-link forks for relief springs.
Price on requestMaximum quantity: 1
EasyCut F 400 Fold - Front disc mower, without conditioner, with swath auger, Working width: 4,04 m, Power requirement: 100 PSPart / order number: 204355900-DE-2324Cannot be combined with: Push-type mounting bracket for three-point front linkage Cat II, - adjustable coil spring relief; Two additional half-height mowing drums with crop-conveying bars.; High-cut skids for cutting heights above 90 mm — 2x.; Spur gearbox for the upper roller drive.; Pull-type mounting frame for Category II three-point front linkage; Wide-spreading deflector plates for faster forage drying.; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Polyurethane roller conditioner without upper roller drive; "PUSH" attachment (pivoting); Top-link forks for relief springs.; Hydraulically folding outer guards; 1 double-acting hydraulic connection required.; M-Rolls steel roller conditioner with upper roller drive; Additional hydraulic lift for increased headland clearance.; Two small conveying drums for a narrower swath; Tractor quick-hitch triangle; Pull-type mounting frame for Category II front three-point linkage, with hydropneumatic suspension.; Closed conditioner tines for increased throwing performance — 8 x; PTO speed 1.000 rpm, clockwise rotation; PTO speed 1.000 rpm, counterclockwise rotation; Relief springs with integrated overload protection.; Category II telescopic top link for adapting inclination to uneven ground; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required); Combination skids with cutting height adjustable from approximately 50–120 mm
Price on requestMaximum quantity: 1
EasyCut F 320 (Generation 2) - Front disc mower, without conditioner, with swath-guiding drum, Working width: 3,14 m, Power requirement: 70 PSPart / order number: 200325320-DE-2324Cannot be combined with: Pull-type mounting frame for Category II three-point front linkage; Combination skids with cutting height adjustable from approximately 50–120 mm; Polyurethane roller conditioner without upper roller drive; M-Rolls steel roller conditioner with upper roller drive; Two additional half-height mowing drums with crop-conveying bars.; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Relief springs with integrated overload protection.; Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; Two additional half-height mowing drums with crop-conveying bars, including mowing-disc covers with conveying strips.; Top-link forks for relief springs.; Push-type mounting bracket for three-point front linkage Cat II, - adjustable coil spring relief; Spur gearbox for the upper roller drive.; Additional hydraulic lift for increased headland clearance.; Closed conditioner tines for increased throwing performance — 8 x; Pull-type mounting frame for Category II front three-point linkage, with hydropneumatic suspension.; Wide-spreading deflector plates for faster forage drying.; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required)
Price on requestMaximum quantity: 1
EasyCut F 320 M (Generation 3) - Front disc mower, without conditioner, Working width: 3,16 m, Power requirement: 65 PSPart / order number: 202331320-DE-2324Cannot be combined with: PTO speed 1.000 rpm, clockwise rotation; Relief springs with integrated overload protection.; Additional hydraulic lift for increased headland clearance.; Tractor quick-hitch triangle; Two additional half-height mowing drums with crop-conveying bars.; Wide-spreading deflector plates for faster forage drying.; Closed conditioner tines for increased throwing performance — 8 x; M-Rolls steel roller conditioner with upper roller drive; Combination skids with cutting height adjustable from approximately 50–120 mm; Spur gearbox for the upper roller drive.; Pull-type mounting frame for Category II three-point front linkage; Two small conveying drums for a narrower swath; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Polyurethane roller conditioner without upper roller drive; "PUSH" attachment (pivoting); Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; PTO speed 1.000 rpm, counterclockwise rotation
Price on requestMaximum quantity: 1
EasyCut F 280 - Front disc mower, without conditioner, with swath-guiding drums, Working width: 2,71 m, Power requirement: 60 PSPart / order number: 200345280-DE-2324Cannot be combined with: Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; Pull-type mounting frame for Category II front three-point linkage, with hydropneumatic suspension.; Additional hydraulic lift for increased headland clearance.; Top-link forks for relief springs.; Two additional half-height mowing drums with crop-conveying bars.; Combination skids with cutting height adjustable from approximately 50–120 mm; Pull-type mounting frame for Category II three-point front linkage; M-Rolls steel roller conditioner with upper roller drive; Relief springs with integrated overload protection.; Two small conveying drums for a narrower swath; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Spur gearbox for the upper roller drive.; PTO speed 1.000 rpm, counterclockwise rotation; PTO speed 1.000 rpm, clockwise rotation; Two additional half-height mowing drums with crop-conveying bars, including mowing-disc covers with conveying strips.; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required); "PUSH" attachment (pivoting); Polyurethane roller conditioner without upper roller drive; Wide-spreading deflector plates for faster forage drying.; Closed conditioner tines for increased throwing performance — 8 x; Push-type mounting bracket for three-point front linkage Cat II, - adjustable coil spring relief
Price on requestMaximum quantity: 1
EasyCut F 320 (Generation 3) - Front disc mower, without conditioner, with swath-guiding drum, Working width: 3,14 m, Power requirement: 70 PSPart / order number: 202330320-DE-2324Cannot be combined with: Additional hydraulic lift for increased headland clearance.; Pull-type mounting frame for Category II three-point front linkage; M-Rolls steel roller conditioner with upper roller drive; PTO speed 1.000 rpm, counterclockwise rotation; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Closed conditioner tines for increased throwing performance — 8 x; Wide-spreading deflector plates for faster forage drying.; Tractor quick-hitch triangle; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Two small conveying drums for a narrower swath; Relief springs with integrated overload protection.; "PUSH" attachment (pivoting); Combination skids with cutting height adjustable from approximately 50–120 mm; PTO speed 1.000 rpm, clockwise rotation; Polyurethane roller conditioner without upper roller drive; Two additional half-height mowing drums with crop-conveying bars.; Spur gearbox for the upper roller drive.
Price on requestMaximum quantity: 1
EasyCut F 320 - Front disc mower, without conditioner, optimised with swath auger, Working width: 3,16 m, Power requirement: 65 PSPart / order number: 204343900-DE-2324Cannot be combined with: Lower-link adapter for short front-linkage arms or very large, wide tractor front tyres; includes an extension for the telescopic top link.; Two additional half-height mowing drums with crop-conveying bars.; Pull-type mounting frame for Category II three-point front linkage; Closed conditioner tines for increased throwing performance — 8 x; Combination skids with cutting height adjustable from approximately 50–120 mm; Polyurethane roller conditioner without upper roller drive; Pull-type mounting frame for Category II front three-point linkage, with hydropneumatic suspension.; Wide-spreading deflector plates for faster forage drying.; Tractor quick-hitch triangle; Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Two small conveying drums for a narrower swath; Spur gearbox for the upper roller drive.; M-Rolls steel roller conditioner with upper roller drive; Relief springs with integrated overload protection.; Additional hydraulic lift for increased headland clearance.
Price on requestMaximum quantity: 1
Working widths with conditioner 4 choices
EasyCut F 320 CV (Generation 2) - Front disc mower with CV high-performance V-shaped steel-tine conditioner, Working width: 3,16 m, Power requirement: 80 PSPart / order number: 200356100-DE-2324Requires: Selection for version with conditionerCannot be combined with: PTO speed 1.000 rpm, counterclockwise rotation; Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; PTO speed 1.000 rpm, clockwise rotation; Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required); Two additional half-height mowing drums with crop-conveying bars, including mowing-disc covers with conveying strips.; Two small conveying drums for a narrower swath; "PUSH" attachment (pivoting); Top-link forks for relief springs.; Relief springs with integrated overload protection.; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Two additional half-height mowing drums with crop-conveying bars.; Tractor quick-hitch triangle; Polyurethane roller conditioner without upper roller drive; M-Rolls steel roller conditioner with upper roller drive; Spur gearbox for the upper roller drive.
Price on requestMaximum quantity: 1
Selection for version without conditionerPart / order number: KeinAufbereiterCannot be combined with: Selection for version with conditioner
Price on requestMaximum quantity: 1
EasyCut F 320 CR - Front disc mower with CR roller conditioner, Working width: 3,16 m, Power requirement: 80 PSPart / order number: 202383200-DE-2324Requires: Selection for version with conditionerCannot be combined with: Relief springs with integrated overload protection.; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required); PTO speed 1.000 rpm, counterclockwise rotation; Two additional half-height mowing drums with crop-conveying bars, including mowing-disc covers with conveying strips.; Tractor quick-hitch triangle; Combination skids with cutting height adjustable from approximately 50–120 mm; Front-mounted camera/monitor system (VKMS), described as certified in the source, for improved visibility at junctions; PTO speed 1.000 rpm, clockwise rotation; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; Two additional half-height mowing drums with crop-conveying bars.; Top-link forks for relief springs.; Closed conditioner tines for increased throwing performance — 8 x; "PUSH" attachment (pivoting); Swath-flap extension to reduce swath width or improve crop flow in very heavy crops
Price on requestMaximum quantity: 1
EasyCut F 400 CV Fold - Front disc mower with CV high-performance V-shaped steel-tine conditioner, Working width: 4.04 m, Power requirement: 100 PSPart / order number: 202365000-DE-2324Requires: Selection for version with conditionerCannot be combined with: Two additional half-height mowing drums with crop-conveying bars.; Push-type mounting bracket for three-point front linkage Cat II, - adjustable coil spring relief; Relief springs with integrated overload protection.; Wide-spreading deflector plates for faster forage drying.; PTO speed 1.000 rpm, counterclockwise rotation; Spur gearbox for the upper roller drive.; Two additional half-height mowing drums with crop-conveying bars, including mowing-disc covers with conveying strips.; High-cut skids for cutting heights above 90 mm — 2x.; Pull-type mounting frame for Category II three-point front linkage; hydropneumatic weight relief (1 single-acting hydraulic connection required); Category II telescopic top link for adapting inclination to uneven ground; Polyurethane roller conditioner without upper roller drive; Closed conditioner tines for increased throwing performance — 8 x; Pull-type mounting frame for Category II front three-point linkage, with hydropneumatic suspension.; M-Rolls steel roller conditioner with upper roller drive; Pull-type mounting frame for Category II three-point front linkage; Two small conveying drums for a narrower swath; 450 mm diameter swathing auger; auger swath merging also permits low working speeds.; "PUSH" attachment (pivoting); Swath-flap extension to reduce swath width or improve crop flow in very heavy crops; Additional hydraulic lift for increased headland clearance.; Top-link forks for relief springs.; Hydraulically folding outer guards; 1 double-acting hydraulic connection required.; PTO speed 1.000 rpm, clockwise rotation; Tractor quick-hitch triangle; Combination skids with cutting height adjustable from approximately 50–120 mm
Price on requestMaximum quantity: 1
Krone NEW